RelinkLabs is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Gps Arduino

What is the best GPS Arduino to buy in 2021?

Looking to buy GPS Arduino but do not know which one suits you best? Then you are in the right place. In this article, we will introduce some of the best products available on the market right now.

In recent years, GPS is getting more and more common as they provide people with location information that can be easily accessed via smartphones, computers, or cars. Such a convenient technology has many great uses: locating, tracking, route directing, etc. Usually, we know it as a built-in technology, but you can also build it yourself with GPS Arduino modules. A GPS module is a small electrical part that can leverage satellite technology. It can receive signals directly from satellites through processors and antennas and then collect timestamps. With timestamps from more satellites (usually 4 or more), it can calculate its time and location. There are many kinds of GPS modules sold on the market. The differences mostly lie in size, accuracy, or power requirement. So let’s dive in and find you the fittest option for your needs.

The Best Gps Arduino of October 2021 – Reviews and Top Rated

Rank No. #1
GPS Module GPS NEO-6M(Ar duino GPS, Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
  • How to use the template, the link is obtained in the product description
  • ★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make sure that the GPS module is in an open location.
  • GPSBaud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
Rank No. #2
DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft
  • When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor.
  • LED signal indicator,With data backup battery
  • EEPROM power down to save the configuration parameters data
Rank No. #3
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
Rank No. #4
BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
  • This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
  • The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
  • Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
  • What you will get: 1 X BN-180 GPS Module
Rank No. #5
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [ADA746]
  • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • 5V friendly design and only 20mA current draw
  • Internal patch antenna + u.FL connector for external active antenna
  • Built-in datalogging
  • Perfect for Raspberry Pi, Arduino and more!
Rank No. #6
BN-880 GPS Module U8 with Flash HMC5883 Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller Geekstory
  • BN-880 is suitable for Open source flight controller, not for flight control with SCM
  • It is dual module compass, with and electronic compass IC HMC5883L
  • This gps module has flash to save configuration. So you do not need to reset next time when you use it
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software
Rank No. #7
Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)
  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions
Rank No. #8
Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer
  • 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use.
  • 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna.
  • 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability.
  • 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer.
Rank No. #9
BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory
  • BN-220 has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us
Rank No. #10
HiLetgo NEO-7M GPS Satellite Positioning Module for Arduino STM32 C51 Replace NEO-6M 3.3V/5V Power Supply
  • 1.Get 51 Arduino STM32 microcontroller routine.
  • 2.With a USB interface, you can watch the computer positioning effect directly phone line.
  • 3.With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.
  • 4.With SMA interface can be directly connected to an active antenna SMA.
  • 5.TTL level, compatible with 3.3V/5V systems.(Size:39*25.5mm)

Last update on 2021-07-29 / Affiliate links / Images from Amazon Product Advertising API

MUST READ  The Best Bose Companion 5 Multimedia Speaker

MakerFocus GPS Module NEO-6M

The first one on the list is the NEO-6M GPS Module from MakerFocus. The main module is GT-U7, using the 7th generation chip, and the software supports NEO-6M. This enables the product high sensitivity while consuming little power from the equipped device. The operating baud rate is 9600 and can be adjusted to balance the performance with power consumption. The operating voltage range is from 3.6V to 5V, but you can also directly use the USB power source supported by the GPS module. The USB interface allows users to connect the module directly to the computer so that the external serial module is not needed. The module’s size is 27.6mm x 26.6mm, weighing 0.346 ounces, and position holes are built for it to be easily inserted. This product is suitable for mobile systems, vehicle monitoring, or handheld devices. Notice that the module will not work in bad weather conditions like storms or thunder, or indoor environments. You have to place it in an open area with good weather conditions for it to work.

Pros:

  • Has USB interface
  • Small size
  • Modern generation chip

Cons:

  • None

Deegoo-FPV GPS Module Receiver

The next product for today is the GPS Module Receiver from Deegoo-FPV. This product has many similar features to the previous one, making them a perfect alternative. This GPS module also has a GT-U7 main module, using the UBLOX 7th generation chip. The software is also compatible with NEO-6M. It can provide high tracking sensitivity and significantly boost the coverage positioning. It can also save energy so that the performance of the equipped device will be least affected. The default distribution of active antennas can be located quickly with IPEX interface. The baud rate is 9600 and can be adjusted to your needs. There will be fewer parameter data consumed as well with onboard E2PROM. The product’s size is 5.12 x 4.92 x 0.28 inches, and the weight is 0.563 ounces, which can be fitted in pocket-sized items. It is best suited with mobile systems like mobile phones, camcorders, vehicles, or handheld devices like personal digital assistants. Deegoo-FPV guarantees that they will contact you back in 24 hours if they receive any problem complaints, so the professional customer service may also be counted as a pro of this product.

Pros:

  • Has USB interface
  • Small size
  • Modern generation chip

Cons:

  • None

DIYmall 6M GPS Module

The next product on the list is the DIYmall 6M GPS Module. This is a 6M GPS module with a 3V-5V power supply and a data backup battery. The ceramic destined antenna allows the module to get super signals, greatly improves accuracy, and reduces odds. However, it is advised by the manufacturer that when you test it, you should do it outside in the plain terrain instead of indoors places. With EEPROM power down, the module can save configuration parameter data. The default baud rate is 9600, like other products. There is also a LED signal indicator equipped on this GPS module. The product’s size is 23mm x 30mm, which can fit in small size devices. The cable’s length is 50mm, and the size of the mounting hole is 3mm. The product is fit for mobile devices like phones, PDAs, vehicles (especially systems like sharing bikes).

Pros:

  • Super signal enhances accuracy
  • Save configuration parameter data
  • Small size

Cons:

  • None

Gowoops GPS Module Single Chip Microcomputer

The last product for today is the Single Chip Microcomputer GPS Module from a brand called Gowoops. This is a model GPS-001 module, with a power supply ranging from 3V to about 5V and 1575.42MHz of frequency. The product offers two ports: USB and SMA. With the USB port, the GPS module can be conveniently connected with a computer via a general mobile phone cable. USB-TTL is not needed. The external antenna is also unnecessary since the product is equipped with a ceramic passive antenna for a wide range of satellite searches. With the SMA port, you can easily connect to the product’s most unique features: a 3m active antenna. Such a long antenna will provide a more powerful search for satellites, hence greatly increase the accuracy of GPS. The module’s size is 3.5 x 4.6 centimeters, combined with the 3-meter antenna, and this does not suit pocket-size devices at all. In fact, it is best used for vehicles, especially ones with high speed, since they need the search ability for satellites to be as strong as possible for the most accurate GPS.

Pros:

  • Powerful antenna
  • USB port and SMA port for a convenient use

Cons:

  • It does not suit pocket-sized or handheld devices
  • 3m cable may cause difficulties in installing

These GPS Arduino modules are the best solution for you in terms of tracking and locating devices. We hope that you can choose the most suitable product after this article. Thanks for reading!

Leave a Reply

nv-author-image

Fabian Walker

Data Scientist, Lab Researcher, Founder of RelinkLabs.com