RelinkLabs is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Xds Red Dot

What are the best XDS Red Dot to buy in 2021?

Looking to buy a new XDS Red Dot but do not know which one is the best to buy? Don’t worry! We are here to give you some insights into the XDS Red Dots market at the moment.

The Springfield XDS gun series is known for its small, lightweight, and concealable appearance, making it very convenient to carry around and for defense when needed. That is one of the main reasons why the Springfield XDS is so popular. However, some disadvantages come with these guns. Their small size can make it more difficult to shoot accurately on a small target or at a distance. The greater recoil feeling caused by small size can also hinder the precise aim. Therefore, a red dot is often needed for XDS guns. It helps improve the aim and helps the owner get a sight on the target faster so that they can quickly react to the circumstances. Especially at night when things are in the dark, and bad guys usually wear black, the bright laser light can make the gun significantly more effective.

There are many kinds of XDS red dots available on the market. So which one suits you best? Let’s do some research and find out.

The Best Xds Red Dot of September 2021 – Reviews and Top Rated

Rank No. #1
Outerimpact Red Dot Adapter/Mount for Springfield XD, XD MOD.2, XD(M), XDS Pistol - M.R.A
  • Proudly 🇺🇸MADE IN THE USA🇺🇸. Buy with confidence knowing that our products are 100% USA Made.
  • COMPATIBLE GUNS: Springfield XD, XD MOD.2, XD(M), XDS Pistol. ❗️Does not work with 5.25″ XD(M) competition series model❗️
  • COMPATIBLE RED DOT SIGHTS: Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, SIG Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screws purchase required), Holosun 507c (additional screw purchase required).
  • MOUNTING HARDWARE INCLUDED. We don't want you having to run to the hardware store to find specialized screws, so we included everything you will need to mount over 90 percent of the Red Dots available on the market.
  • MACHINED FROM 7075-T6 ALUMINUM. Providing excellent strength, while still being lightweight. Engineered, so you don't have to mill your slide. Just remove your rear slight and mount the MRA in its place.
Rank No. #2
Vortex Optics Venom Red Dot Sight - 3 MOA Dot
  • The Venom Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.
  • High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.
  • The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers. Parallax Free
  • 1 MOA wind age and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.
  • The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility.O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments
Rank No. #3
Ade RD3-013 Red Dot Reflex Sight for Springfield XDM XD-M OSP Pistol Handgun
  • Does NOT fit the new HELLCAT OSP. Fits directly on Springfield XDM XD-M OSP system with the #1 mount that comes with OSP without needing to remove the rear sight. This optics does NOT fit XDM/XD/XDS, it only fits xdm OSP models which are the springfield's newest Optics Ready Pistols.
  • For Non-OSP XDM/XD/XDS models, this red dot need a red dot mount to replace the rear sight. Search amazon item # B087H5GHCR for the plate. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
  • Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail.
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button.
Rank No. #4
Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight for Springfield XD Pistol
  • Comes with mounting plate for Springfield XD and also a standard picatinny mount. Does NOT fits XDS, XDM.
  • We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
Rank No. #5
DPP Titanium Rear Sight Mount/Mounting Plate/Adapter Compatible with Springfield XD Vortex Venom & Viper, Burris Fastfire, Docter (Aluminum Alloy)
  • COMPATIBLE WITH: Springfield XD, XD MOD.2, XDS, XD(M), Pistol. *Does not work with 5.25″ XD(M) competition series model.
  • Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.
  • Update to 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.no more need shim! Installation hardware and tools included.
  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish.
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY
SaleRank No. #6
Vortex Optics Viper Red Dot Sight - 6 MOA Dot
  • The Viper Red Dot Sight has a super low-profile making it perfect for handguns with cut-out slides.
  • The Viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.
  • The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.
  • Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.
  • Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Rank No. #7
ESSLNB Red Dot Sight Airsoft Sights Scope Red/Green/Blue 3 Brightness Settings Reflex Sight with 11mm/22mm Weaver/Picatinny Rail Mount and Covers
  • Wide field of view: Red dot scopes with 30mm reflex lens aperture provides a wide field of view of 19m at 100m,suitable for rapid shooting of moving or normal targets.
  • Unlimited eye-relief:Tailor airsoft optics brightness to your environment with 3 levels. Reflex sight with red green blue reticles offer unlimited eye-relief and corrected parallax.
  • Clear image: Clarity, Clear and Sharp 5.0 MOA Dot allows for accurate. Airsoft scope with multi-coated, scratch resistant sight scope lens provides enhanced image clarity.
  • Easy to use: Red dot scope has 11mm and 20mm (3/8" & 5/8") detachable weaver or picatinny rail mount .Two modes to attach and precision windage and elevation adjustments feature quick release mount.No need to rezero when remounting the dismounted sight.
  • Durability and Solid Construction: It’s made of Aluminum Alloy, airsoft sights is durable and lightweight,waterproof and shockproof. Low power consumption for long battery life. Rubber dust cover offer better protection.
Rank No. #8
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Crusader RD3-009 Red Dot. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
Rank No. #9
Ronin P11 Red Dot Sight 1x20mm 50000 Hour 2 MOA Red Dot Optics Scope
  • [ MOTION SENSOR ] The P11 Red Dot automatically turns on when it is moved and will auto shut off if not moved for 4 hours.
  • [ 50,000 HOUR BATTERY LIFE ] 1 CR2032 battery will last up to 50,000 hours of use with a crisp 2 MOA Red Dot with 12 Brightness Settings.
  • [ RUGGED DESIGN ] The P11 is a one piece Aluminum construction that is Fog Proof, Shock Resistant, Water Resistant, and comes with Kill-flash.
  • [ PICATINNY MOUNT ] Industry standard 1913 picatinny mounting structure.
  • [ LIFETIME WARRANTY ] We are committed to 100% customer satisfaction. We will repair or replace your optic at no charge for life.
SaleRank No. #10
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
  • New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25″ XDM competition series)
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25″ XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.

Last update on 2021-07-29 / Affiliate links / Images from Amazon Product Advertising API

MUST READ  The Best Glock Rail Mount

Viridian Essential Red Laser Sight

The first one for today is the Essential Red Laser Sight from Viridian Weapon Technologies. Their XDS Red Dot is compatible with both Springfield XDS and XDS Mod 2. This product uses an advanced 650nm wavelength laser light to provide the most visible and on point targeting red dot. It is a class 3R laser type extending up to 25 yards in the daytime and up to 1 mile at nighttime. Such a sharp and bright laser ray will help you get a sight quickly and precisely. To activate the red dot, press the simple ambidextrous button. It is easy whether you are left-handed or right-handed, just press, point, and shoot. The Viridian red dot uses a ≤ 5mW power output, with a battery that can last 6 hours constantly. There are questions whether equipping an additional red dot with its battery would make the gun heavier or not. The answer is no for Viridian Red Laser Sight. The product is made of strong thermo molded polymer, which is only 0.78oz in weight. 

Pros:

  • Accurate and bright 650nm wavelength laser ray
  • Long-lasting battery
  • Very lightweight

Cons:

  • None 

Crimson Trace LG-469 Laserguard

The next product we are going to introduce is the Crimson Trace LG-469 Laserguard. Actually, there are two versions: LG-469 and LG-469G, an upgraded version, and we will go through both of them. This product is compatible with the Springfield XDS gun. However, it does not support the XDS Mod 2 model. It used a class 3R laser with a power output of up to 5mW. While version LG-469 uses a red laser with 620 – 670nm wavelength length, version LG-469 uses a green laser with 515 – 532nm wavelength length, stronger and brighter. You can activate the red dot with a front activation button designed to be easily pressed while holding the gun in a normal grip. The ray can extend up to 50 feet and can be adjusted according to windage and elevation with provided tools to suit the circumstances. Both versions use a 1/3N battery. However, while the LG-469 can be activated for 4 hours, the LG-469G can only last 2 hours due to a stronger laser ray. 

 

MUST READ  Best Water Filled Kettlebells

Pros:

  • 2 different versions to choose from, according to your needs
  • Accurate and bright laser ray
  • Easy to activate and can be adjusted for windage and elevation

Cons:

  • It does not fit Mod 2 XDS guns

LaserTac TM Rechargeable Laser Sight

The next product on the list is the LaserTac TM Rechargeable Laser Sight. This is more like a one-size-fits-all option, as it will be compatible with all sizes of handguns with an accessory rail. It uses a TM-R red laser with a wavelength of 650nm and a maximum 5mW power output. As the name suggests, this product’s battery can be recharged via a USB port using the common micro USB cable. You can plug it into an adapter or any device with a USB port and can be used as a power source like laptops or PCs. To activate the laser ray, push the on/off switches on the product’s sides. It is ambidextrous and suitable for both left-handed and right-handed people. For greater accuracy, the red dot can also be adjusted for elevation and windage with the allen wrench provided in the package when you buy the product. Since it supports all sizes of handguns if you own other guns and want to equip them with this product as well. It is worth noting that the switches may be harder to reach on full size and single rail groove handguns.

Pros:

  • It fits all sizes of handguns with an accessory rail
  • Accurate and bright laser ray

Cons:

  • The switch may be inconvenient to trigger in some circumstances

Crimson Trace CMR-201 Rail Master Universal Laser

The last red dot for today is another product made by Crimson Trace, the CMR-201 Rail Master Universal Laser. It is designed to fit with rail equipped pistols, so make sure your XDS firearm has an accessory rail before purchasing this product. Like many other products, it uses a class 3R red laser with a 620 – 670nm wavelength and a maximum power output of 5mW, a very bright laser ray. The 1/3N lithium battery equipped with this product enables the red dot to run constantly for 4 hours. The activation process is quick and simple, with ambidextrous tap-on/tap-off controls on both sides of the product. Since it is quick and simple to activate, there might be times the red dot is turned on by mistake. If that happens, the product will automatically turn off after 5 minutes to save power. The laser ray can be adjusted for windage and elevation with a 0.05 allen wrench. When used on XDS handguns, one weakness of this product is that since it is designed to fit many kinds of guns, even rifles, the product weight is a little heavy (3.2 ounces). This may hinder the accuracy and quickness of some people.

Pros:

  • Bright and accurate laser ray
  • Long-lasting battery with a power-saving function
  • It fits many kinds of guns

Cons:

  • Heavyweight makes it not really suitable for handguns

That is all of our introduction on XDS Red Dot for today. Your aim on XDS handguns will be significantly more accurate with this product. Stay safe, and thank you for reading!

Leave a Reply

nv-author-image

Fabian Walker

Data Scientist, Lab Researcher, Founder of RelinkLabs.com